The Initial Setup Menu; Using The Initial Setup Menu - Pioneer S-LX70C Operating Instructions Manual

The Initial Setup menu

15
Chapter 15
The Initial Setup menu

Using the Initial Setup menu

The Initial Setup menu is where you can set various recorder options for sound, picture, language and so on.
Some settings can only be changed when the recorder is stopped. During playback and recording these settings are
grayed out in the Initial Setup menu.
Except for the Setup Navigator, menu screens are exited automatically after 20 minutes of inactivity.
• Press HOME MENU and select 'Initial Setup'.
In the table below, the default option is marked with a •.
Setting
Basic
Clock Setting
• If any digital TV channels are set then the clock will automatically be set.
• The clock must be set in order to use timer recording.
Input Line System
• This setting is applicable only when recording from an external input. Note that you cannot select an external input when AV2/L1 In is set to
Decoder (page 155).
• See also About the input line system on page 161 for more information on this setting.
Power Save
HELP Setting
EPG Type Select
Setup Navigator
152
En
Options Explanation
Auto Set the channel that broadcasts a clock signal and the clock will be set
automatically.
Manual • If there is no channel that broadcasts a clock signal in your area, you can set
the time and date manually.
525 System Use for NTSC or PAL-60 recording from an external input.
625 System • Use for standard PAL or SECAM recording.
Mode 1 Only signals arriving at the antenna input are passed through to the antenna
output when the recorder is in standby.
Mode 2 No input signals are passed through to the outputs when the recorder is in
standby.
Off • When the recorder is in standby, all signals arriving at the SCART and
antenna inputs are passed along to the outputs.
On • Switches on the automatic Help screens for GUI displays.
Off Switches off the automatic Help screens for GUI displays. (Press HELP on
the remote to manually display the Help screen.)
GUIDE Plus+ Use the Gemstar GUIDE Plus+ EPG.
Digital EPG Use the EPG based on information provided by D.TV broadcasts.
Start Select to start the Setup Navigator. See also Switching on and setting up on
page 68 .