The Gang Charger - Only On Mobile Iptouch 600; Cleaning The Chargers - Alcatel IPTOUCH 300 User Manual

Indicator light.
When the handset or Battery Pack is seated correctly, the corresponding indicator light will come on. A bright indicator means
the Battery Pack is charging, a dim indicator means the Battery Pack is waiting to charge. The indicator light will not come on
when the handset is incorrectly seated, the slot is empty or when the Dual Charger has no power applied. If the indicator light
is off or flashing, it means the handset or Battery Pack is incorrectly seated. Remove the handset or Battery Pack and reinsert.
If the LED continues to blink or starts blinking at any time during the charging process, it indicates that there is a problem with
the Battery Pack that makes it unusable. Do not continue to charge the Battery Pack. Dispose of it properly and do not attempt
to use it in the MIPT. Do not attempt to open or repair a defective Battery Pack. Contact your service representative for
assistance.
The indicator light will turn off when charging is complete. Full charging is accomplished in approximately two hours for either
slot.
Charging indicator.
While the MIPT is charging in standby mode, it will display its extension number and Charging... The battery icon will show
charging progress. The handset is fully operational and will ring if called. When the MIPT is charging while turned off, only
Charging will display and no calls will be received.
Charge Complete.
When the MIPT is fully charged, Charge Complete will display. If the MIPT has been turned off, the charge complete melody will
play when it is turned on.

The Gang Charger - only on Mobile IPTouch 600

6.4
The Gang Charger is designed to charge four Nickel Metal Hydride (NiMH) Battery Packs simultaneously. Full charging is
accomplished in approximately one and a half hours. Chargers operate in a 50° to 85° F (10° to 30° C) environment. Do not
expose them to freezing temperatures or direct sunlight.
The Gang Charger is shipped with the appropriate power supply for the sites location. Place the Gang Charger on a flat, horizontal
surface. Plug the power supply into the Gang Charger and into an appropriate wall outlet.
Using the GC
Insert the Battery Pack into one of the four charging bays so that the Battery Pack contacts meet the charging bay contacts. The
LED above the charging bay will turn on to indicate that charging is in progress. Complete charging occurs in one and a half to
two hours. The Battery Pack is partially charged in five minutes. When charging is complete the LED will turn off. Lift the
Battery Pack out of the charging bay.
Blinking LED
If the LED starts blinking as soon as the Battery Pack is inserted, the Battery Pack may be improperly seated. Lift it out and
reinsert. If the LED continues to blink or starts blinking at any time during the charging process, it indicates that there is a
problem with the Battery Pack that makes it unusable. Do not continue to charge the Battery Pack. Dispose of it properly and
do not attempt to use it in the MIPT. Do not attempt to open or repair a defective Battery Pack. Contact your service
representative for assistance.
Batteries and chargers

Cleaning the Chargers

6.5
Clean the Chargers by wiping the surface with a clean, water-dampened cloth or paper towel. A mild detergent solution may be
used. Be sure to wipe away any detergent residue with a plain water dampened cloth. DO NOT IMMERSE THE CHARGER IN
WATER OR OTHER LIQUID. DO NOT POUR LIQUIDS INTO THE SLOT.
The Battery Pack contacts on the MIPT may be cleaned with isopropyl (rubbing) alcohol applied with a Q-tip, cloth, or paper
towel. Do not push or pull the exposed Battery Pack contacts.
Important information
• Never use non-MIPT charging units as they could damage the Battery Pack.
• Only use the original plug-in power adapter for the Chargers.
• Do not immerse the Battery Pack in water or throw into the fire.
• Do not throw away the Battery Pack with your domestic waste. Take used Battery Packs to an appropriate collection point for
recycling or send them back to your supplier or servicing agent.
• Replacement Battery Packs are available from your supplier or servicing agent.
23