Advertisement
Quick Links
E260 S VOICE /
E260 S VOICE DUO /
E260 S VOICE TRIO
EN
| User Guide
Fig. 1.
Table. 1.
ENGLISH
BEFORE 1st USE
Connecting your phone:
•
Connect plugs in corresponding sockets in the
base station.
Plug the telephone line into telephone socket and
insert power plug in an electrical outlet.
•
Insert batteries in the handset and place it on its
base to start charging.
Before you start to use your telephone, charge batteries
continuously for 15 hours.
Use only plug adapter and rechargeable batteries
supplied with your phone.
After first time power up (base unit is connected
to AC mains), welcome mode message will appear
on the screen (Fig.1) .
Select the country where you are using the phone
and confirm.
To select a different language, see Table 1.
HANDSET / BASE STATION KEYS
1.
MENU/OK key
2.
Back/Correction/Intercom key
3.
Navigation key/Call log access*/
Volume level increase
Navigation key/Volume level decrease
4.
Talk key/Handsfree
5.
Hang-up/Exit key
6.
Direct access key to answering machine menu
7.
Phonebook key
8.
Call Block key*
9.
10. Recall (Flash) key
- To access to operator services*
11. Redial list access
(in standby mode : press and hold)
12. Paging key
- To locate handset (short press) /
to start
registration procedure. See General
Settings chapter.
*Subject to subscription and availability of the service
from the fixed line operator.
DISPLAY ICONS
Battery level indicator
(full
, mid
, empty
).
Indicates that phone is on line or held.
Icon blinks when receiving an incoming call.
Indicates you have a new voice mail message*.
Answering machine is on;
blinking in case of new message
Indicates you have new missed calls*.
Displays when the alarm clock is activated.
Displays when handsfree is activated.
Displays when ringer volume is turned off.
Indicates that the handset is registered and
within range of the base station.
Icon blinks when the handset is out of range or
is searching for a base.
GENERAL SETTINGS
This phone can be customized according to your
preferences, to access the different possibilities press:
.
•
To customize handset (Alarm, Ring setup,
... Language, ... Date & Time):
SETTINGS /
.
•
To change Pin code, Flash time:
SETTINGS /
.
For example, to change language or flashtime:
•
/
or
select HS SETTINGS /
select LANGUAGE /
/
desired language /
.
•
/
or
select BS SETTINGS /
or
select FLASH TIME /
SHORT / MEDIUM or LONG /
To register a handset (if needed):
On main base, press and hold for 10s the paging key
(number
).
On the handset to be registered: press /
select REGISTRATION / press
(default 0000) / press
, handset is paired in few
seconds.
USING THE PHONE
Receive and end a call
•
/
Make a call
•
either before or after dialing your number.
•
From redial list: Press
/
•
From call log list*: Press
/
•
From direct memories: press and hold on
or
in idle mode.
•
From phonebook:
/
or
•
During a call, to activate/desactivate handsfree:
.
To make an internal call
•
If only 2 registered handsets:
•
If more than 2 registered handsets:
select the handset number /
•
To ring all handsets to intercom:
select CALL ALL /
To make a three-party conference call
(with one external, two internals):
During call:
•
Press /
select the handset number /
•
Press
•
Press and hold for 2 seconds
handset to establish conference call.
PHONEBOOK AND DIRECT MEMORIES
To register in phonebook (50 entries)
/ select PHONEBOOK /
/ enter name of contact /
contact /
as CONTACT.
To register the direct memories in keys 1, 2, & 3
/
or
select DIRECT MEM /
(Key 1, Key 2, Key 3) /
Notes:
- Phonebook is shared with duo, trio handsets.
ANSWERING MACHINE SETTING BY
Set the answer mode
/
or
to select TAM SETTINGS /
MODE /
ANS & REC /
Record a personalised outgoing message
/
or
select TAM SETTINGS /
SETTINGS /
or ANS & REC /
/
to start recording /
Change the default outgoing message language
(if needed)
/
or
to select TAM SETTING /
LANGUAGE /
language /
or
select HS
Set answer delay
/
or
or
select BS
to select TAM SETTING /
DELAY /
If you have subscribed to a voice mail service from
/
or
your Operator, make sure to set shorter delay on your
or
select your
phone, so that your phone can answer and record a
message.
/
/
or
select
ANSWERING MACHINE USE BY
.
You can control the Answering Machine by short cuts
on the keypad instead of going through the menu.
Turn the answering machine on or off
/
/
/
or
/ enter PIN code
to select ON or OFF /
Playback/Delete messages/Others
/ MSG PLAYBACK /
handsfree mode. While you are listening to a message,
press
backward /
Answering machine menu can also be reached by:
/
or
to select ANS. MACHINE /
Remote access to answering machine
or
/
.
Dial your home phone number. While the answering
or
/
.
machine is playing the outgoing message, press
or
and enter remote access code (default 0000).
/
.
.
/
.
/
or
.
/ select INTERCOM /
/
.
on the called handset to answer.
on the calling
SETTINGS
/
/ select ADD /
/ enter number of
/
or
to select melody /
select HS SETTINGS /
/
/
or
select one key
/ enter the number /
HANDSET
to select ANS.MACHINE /
/
/ to select ANSWER
to select ANSWER ONLY or
/
or
.
select ANS. MACHINE /
/
/
or
select OGM
/
or
to select ANSWER ONLY
/
or
select RECORD MESS
to end recording.
to select ANS.MACHINE /
/
/
or
to select TAM
/
or
to select your preferred
.
to select ANS.MACHINE /
/
to select ANSWER
/
or
to select 2-10 RINGS /
HANDSET
to select TAM ON/OFF /
/
.
/ to start playback in
to stop /
to go forward /
to delete message.
.
or
or
/ to save
or
.
or
or
or
or
.
or
to go
1/2
Advertisement
Related Manuals for Alcatel E260 S VOICE
Summary of Contents for Alcatel E260 S VOICE
- Page 1 HANDSET / BASE STATION KEYS E260 S VOICE / • To ring all handsets to intercom: MENU/OK key E260 S VOICE DUO / select CALL ALL / Back/Correction/Intercom key E260 S VOICE TRIO Navigation key/Call log access*/ To make a three-party conference call...
- Page 2 Do not open save to Block list. Alcatel is a trademark of Nokia, your device or its power supply to avoid risk of electrical used under license by Atlinks.
Need help?
Do you have a question about the E260 S VOICE and is the answer not in the manual?
Questions and answers
phone makes chattering sound before l make a call
The Alcatel E260 S VOICE phone makes a chattering sound before making a call due to a low battery, which causes it to emit an annoying 'beep-beep' sound even if the power indicator shows two bars.
This answer is automatically generated
When I try to make a call I receive the message 'Line in use' but the phone is not in use. Can you suggest anything?
The Alcatel E260 S VOICE displays 'Line in use' when making a call because the phone is either currently connected to an active call or another handset registered to the same base station is using the line. This indicator ensures users are aware that the line is occupied.
This answer is automatically generated
How do I indert batteries into phone handset
How do i insert batteries into phone
just bought the 3 pack plugged in and says line in use cannot make or recieve calls the old phone i disconnected worked fine please advise as there was no manual in box i have downloaded a manual but doesnt tell you how to set up or any trouble shooting hints
How can I check what volume my phone is on. For example if someone has left the volume on 1, I might not hear a call. How can I easily check this?
E260 S Voice - Handset keeps saying line in use when trying to ring a number
The Alcatel E260 S Voice handset may say "line in use" when trying to make a call because the phone is already on a call or held. The manual states that an icon indicates when the phone is online or held, and it blinks when receiving an incoming call. This suggests that another handset or device may be using the line, preventing a new call from being made.
This answer is automatically generated