Attaching The Module; Releasing The Cable; Connecting The Cable; Removing The Module - Bernina Aurora 440QE User Manual

Attaching the module

Attaching the module
• place the module on the sewing compu-
ter behind the free arm
• push the module from the left towards
the sewing computer so that the connec-
ting lugs engage in the base plate
• Unplug foot control

Connecting the cable

• plug with flat side to the front
• insert the plug into the socket on the
right hand side of the sewing computer
Storing the cable on the module
• insert the cable into both cable holders
• press cable gently to secure

Releasing the cable

• the cable connects the module to the
sewing computer
• pull the cable out of the holder on the
back of the module

Removing the module

• unplug cable
• grip the back right corner to lift the
module and remove to the left
032907.52.04_1103_a430_a440_a450_EN
Attaching the module
When connecting the em-
broidery module, attention
must be paid that all items
are on a flat and even
surface!
Always separate the module
and sewing computer for
transportation. Never trans-
port them attached.
63