Related Manuals for GW Instek PEL-2040
Summarization of Contents
Safety Instructions
Safety Symbols
Explains symbols used for warnings and cautions in the manual and on the device.
Getting Started
Main Features
Details the key capabilities and advantages of the PEL-2000 series electronic load.
Front Panel Overview
Describes the layout and function of controls on the front panel of the mainframe.
Installation Procedures
Provides step-by-step instructions for installing load modules and optional accessories.
Load Connections
Explains how to properly connect loads to the PEL-2000, including precautions and wire gauge.
Operation Description
Operating Mode Description
Details the three primary operating modes: Constant Current, Constant Resistance, and Constant Voltage.
Configurations Description
Explains various configurations like protection modes, operating settings, and file system.
Operation Guide
Local Mode Operation
Describes how to operate the load modules directly from their control panels.
Mainframe Basic Operation
Covers fundamental operations performed using the mainframe's main configuration panel.
Channel Configuration
Details how to configure settings for individual channels on the load module.
Mainframe Configuration
Explains configuration settings applied to all channels and general interface settings.
Interface Configuration Settings
Configuring RS232 Connection
Details the parameters and steps for setting up an RS232 serial connection.
Configuring GPIB Address
Explains how to set the GPIB address for remote control.
Configuring USB Remote Connection
Explains the procedure for establishing a remote connection using the USB interface.
Save and Recall Data
Saving and Recalling Channels
Instructions for saving and recalling channel data and memory settings.
Saving and Recalling Presets
Describes how to save and recall channel presets to internal memory or USB.
Saving and Recalling Setups
Describes how to save and recall the instrument's setup configurations to memory.
Saving and Recalling Sequences
Instructions for saving and recalling sequences to USB flash drives.
Interface Details
Interface Configuration
Details pin assignments and configurations for RS232, GPIB, and Channel Control interfaces.
Appendix
Fuse Replacement
Step-by-step guide on how to safely replace the fuse in the electronic load.
Battery Replacement
Instructions for replacing the onboard battery that powers the real-time clock and memory.
Firmware Update
Procedure for updating the PEL-2000's firmware using a USB memory stick.
Calibration Procedure
Information regarding the calibration process and the need for professional service.
Specifications
Detailed technical specifications for all PEL-2000 series load modules and mainframes.
Need help?
Do you have a question about the PEL-2040 and is the answer not in the manual?
Questions and answers