Controller Configuration - Asus PIKE 6480 User Manual

2.2.6

Controller Configuration

From the utility menu bar, select Controller, and then press <Enter>. The
Controller Config screen appears and allows you to change controller settings.
Marvell BIOS Setup (c) 2008 Marvell Technology Group Ltd.
[Selection]
[Controller Config]
INT 13h
Silent Mode
Halt On Error
Straggered Spin Up
HDD-Detect Time(s)
ENTER/SPACE:Select, ESC:Back/Exit
INT 13h [Enable]
Allows you to enable or disable the Interrupt 13h support. Set this item to [Enable]
if you want to use the device(s) connected to PIKE 6480 as boot device. Set this
item to [Disable] if you want to use the device(s) connected to PIKE 6480 as data
device. Configuration options: [Disable] [Enable]
Silent Mode [Enable]
Allows you to enable or disable the BIOS POST silent mode. When enabled, the
information of the drives connected to PIKE 6480 will be hidden during system
POST. Configuration options: [Disable] [Enable]
Halt On Error [Disable]
Allows you to enable or disable the Halt On Error function. When enabled, the
BIOS POST will halt when an error (such as virtual drive status changes) occurs
and require user's confirmation to continue.
Configuration options: [Disable] [Enable]
Staggered Spin UP
Allows you to select the number of ports per spin up group and the spin up delay
time per second between groups.
Number of Devices Per Group
Configuration options: [1] [2] – [7] [8]
Group Spin Up Delay(s)
Configuration options: [0] [1] – [6] [7]
HDD-Detect Time(s)
Configuration options: [0] [1] – [9] [10]
2-12
[Controller] [ Devices ]
[Enable]
[Enable]
[Disable]
Options
Options
[ RAID ]
Chapter 2: RAID configuration