Creating An Array - Asus PIKE 6480 User Manual

2.2.1

Creating an array

To create a RAID set:
From the utility menu bar, select RAID > Create array.
1.
Marvell BIOS Setup (c) 2008 Marvell Technology Group Ltd.
[Selection]
ENTER/SPACE:Select, ESC:Back/Exit
2. Press <Enter>. The screen shows the disks you can add to make up
the RAID set. Use the arrow key to select a disk and press <Enter> or
<Space> to include this disk in the array.
Marvell BIOS Setup (c) 2008 Marvell Technology Group Ltd.
[Selection]
Select free disks to create
Port Disk Name
0 SAS : ST3146855SS
1 SAS : ST3146855SS
2 SAS : ST3146855SS
3 SAS : ST3146855SS
4 SAS : ST3146855SS
5 SAS : ST3146855SS
6 SAS : ST3146855SS
7 SAS : ST3146855SS
NEXT
ENTER/SPACE:Select, ESC:Back/Exit
3. After you have selected the desired disks, select NEXT to create array.
2-4
[Controller] [ Devices ]
[Controller] [ Devices ]
Size
139.9GB SAS 3.0
139.9GB SAS 3.0
139.9GB SAS 3.0
139.9GB SAS 3.0
139.9GB SAS 3.0
139.9GB SAS 3.0
139.9GB SAS 3.0
139.9GB SAS 3.0
[ RAID ]
RAID Config
Create array
Delete array
Wipe out disk
Spare Management
[ RAID ]
RAID Config
Max Speed Status
FREE
FREE
FREE
FREE
FREE
FREE
FREE
FREE
Chapter 2: RAID configuration