Installing A Hot-Swap Power Supply - IBM 71412RU User Manual

15. Connect any required cables to the adapter.
If you have other devices to install or remove, do so now. Otherwise, go to
"Completing the installation" on page 55.

Installing a hot-swap power supply

Statement 5:
CAUTION:
The power control button on the device and the power switch on the power
supply do not turn off the electrical current supplied to the device. The device
also might have more than one power cord. To remove all electrical current
from the device, ensure that all power cords are disconnected from the power
source.
Retention pin
Adapter-retention
bracket
Removal button
Note: Press the removal button and pull up on the ratchet pin to remove the
ratchet pin from the adapter-retention bracket.
Chapter 2. Installing optional devices
35