Electrolux E48GC76EPS - 48" Sealed Burner Slide-In Gas Cooktop Installation Instructions Manual page 31

STEP 12 Apply labels and reassemble
12-1 Wait for all the burners to cool.
12-2 Fill out and apply the conversion labels:
• Apply one where it can be easily read on the
floor of the chassis.
• Apply the other near the rating label on the
underside of the cooktop.
12-3 Remove all of the burner heads.
Burner Ratings and Altitude Considerations
The Electrolux Professional Series cooktop is equipped burners having the following ratings:
A Sealed power burner(s) – input rating: 17,000 BTU per hour.
B Sealed power burners – input rating: 15,000 BTU per hour.
C Sealed precision burner(s) – input rating: 8500 BTU per hour
For elevations above 2000 feet, burner ratings are reduced at the rate of 4% for each 1000 feet above sea level.
Professional Series Cooktop LPG Conversion Kit
CONVERSION INFORMATION
AFFIX THIS LABEL AS CLOSE AS POSSIBLE TO THE EXISING
RATING PLATE.
FOR MODEL NO., RATINGS AND MANIFOLD PRESSURE
INFORMATION: SEE ORIGINAL NAME PLATE.
GAS SUPPLY TYPE:
NATURAL GAS
LP
CONVERSION KIT P/N
THIS APPLIANCE WAS CONVERTED ON
TO
(INSTALLER)
WHICH ACCEPTS THE RESPONSIBILITY THAT THIS CONVERSION
HAS BEEN PROPERLY MADE
Figure 12-1 Conversion Label
B
C
E36GC76EPS (36-Inch) and E48GC76EPS (48-Inch)
Figure 12-2 Burner Layout
12-4 Install the spill tray.
12-5 Replace the burner heads, burner head nuts,
burner rings, and burner caps. Be sure the
igniter wire is connected to the igniter for each
burner head.
12-6 Install the cooktop grates.
DAY/MONTH/YEAR
GAS WITH KIT NO.
OF
(COMPANY NAME)
A
A
Page 11
C
B