Electrolux E48GC76EPS - 48" Sealed Burner Slide-In Gas Cooktop Installation Instructions Manual page 24

STEP 4 Convert Regulator to LPG
4-1 Locate the regulator. It is underneath the
cooktop, below the right rear burner.
4-2 Remove the regulator cap from the regulator.
Make sure that the regulator spring remains in
place.
Regulator spring
Spool: Direction
for LPG
Regulator cap
Spool: Direction
for natural gas
Figure 4-1 Regulator Conversion
Page 4
4-3 Remove the spool from the cap and insert the
opposite side. The large end of the spool must
insert into the regulator first for LPG operation.
4-4 Replace the cap, inserting the end of the spool
into the center of the regulator spring.
Regulator Location