Electrolux E48GC76EPS - 48" Sealed Burner Slide-In Gas Cooktop Installation Instructions Manual page 25

STEP 5 Disassemble Cooktop
5-1 Insert the large end of the burner ring removal
tool into the top of the left rear burner head.
Unscrew and remove the nut.
5-2 Remove the burner head. Slip the igniter wire off
of the burner as you remove it.
Removal tool
Retaining nut
Burner head
Professional Series Cooktop LPG Conversion Kit
5-3 Repeat steps 5-1 and 5-2 for the remaining
5-4 Lift out the spill tray.
Igniter
Figure 5-1 Burner Head Removal
Page 5
burners.
Spill tray