Table of Contents
Advertisement
1 . 6 . 6
1 . 6 . 6
Rebuilding a RAID 1 set
Rebuilding a RAID 1 set
1 . 6 . 6 Rebuilding a RAID 1 set
1 . 6 . 6
1 . 6 . 6
Rebuilding a RAID 1 set
Rebuilding a RAID 1 set
The R e b u i l d A r r a y M e n u
R e b u i l d A r r a y M e n u
R e b u i l d A r r a y M e n u
R e b u i l d A r r a y M e n u allows you to rebuild a RAID 1 set and recover
R e b u i l d A r r a y M e n u
the array from errors. During POST, the FastTrak S150 TX4™ BIOS checks
and displays the RAID 1 condition. The screen displays the following
information if the BIOS detected an error on the array.
To rebuild the array:
1.
Press <Ctrl> + <F> to enter the FastBuild™ Utility.
2.
From the FastBuild™ Utility main menu, press <3> to display the
D e f i n e A r r a y M e n u
D e f i n e A r r a y M e n u
D e f i n e A r r a y M e n u
D e f i n e A r r a y M e n u.
D e f i n e A r r a y M e n u
3.
Select the failed array, then identify the failed drive channel and ID.
4.
Exit the utility, then turn off the system.
5.
Replace the failed drive with an identical (same storage capacity) drive.
R A I D c o n f i g u r a t i o n a n d d r i v e r i n s t a l l a t i o n
R A I D c o n f i g u r a t i o n a n d d r i v e r i n s t a l l a t i o n
R A I D c o n f i g u r a t i o n a n d d r i v e r i n s t a l l a t i o n
R A I D c o n f i g u r a t i o n a n d d r i v e r i n s t a l l a t i o n
R A I D c o n f i g u r a t i o n a n d d r i v e r i n s t a l l a t i o n
3 9
3 9
3 9
3 9
3 9
Advertisement
Table of Contents
