Table of Contents
Advertisement
6.
When prompted, use the arrow keys to select the source disk, then
press <Enter>.
7.
When prompted to start the duplication process, press <Y> to
continue; otherwise, press <N> to abort the operation.
8.
After you have created the RAID 1 set, press any key to reboot the system.
During POST, the FastTrak S150 TX4™ BIOS checks and displays the
disk array information.
9.
Use the FDISK utility to format the array as a single hard drive.
10. After you have formatted the arrayed drives, install an operating
system (OS). The OS will treat the RAID 1 array as a single drive unit.
R A I D c o n f i g u r a t i o n a n d d r i v e r i n s t a l l a t i o n
R A I D c o n f i g u r a t i o n a n d d r i v e r i n s t a l l a t i o n
R A I D c o n f i g u r a t i o n a n d d r i v e r i n s t a l l a t i o n
R A I D c o n f i g u r a t i o n a n d d r i v e r i n s t a l l a t i o n
R A I D c o n f i g u r a t i o n a n d d r i v e r i n s t a l l a t i o n
2 9
2 9
2 9
2 9
2 9
Advertisement
Table of Contents
