Creating A Raid 0+1 Set (Security And Performance) - Asus AP1720-E2 Configuration And Installation Manual

1 . 1 . 1 . 1 . 1 .6 6 6 6 6 . 3

. 3 . 3 Creating a RAID 0+1 set (Security and Performance)

. 3 . 3 Creating a RAID 0+1 set (Security and Performance) Creating a RAID 0+1 set (Security and Performance)
Creating a RAID 0+1 set (Security and Performance) Creating a RAID 0+1 set (Security and Performance)
You must install four SATA hard disk drives to create a RAID 0+1 set.
1. Restart the system, then enter the FastBuild™ Utility.
2. In the FastBuild™ Utility main menu, press <1> to select A u t o
S e t u p S e t u p. The following screen appears. S e t u p
S e t u p S e t u p
3. Use the arrow keys to go to the Optimize Array for
S e c u r i t y S e c u r i t y
select S e c u r i t y S e c u r i t y using the space bar. The M o d e S e c u r i t y
S t r i p e S t r i p e. S t r i p e
S t r i p e S t r i p e
4. After making a selection, press <Ctrl+Y>.
5. A pop-up window appears. Press <Y> (Create and Quick Initialize) to
create the RAID 0+1 set.
3 2 3 2
3 2 3 2 3 2
Optimize Array for Optimize Array for
Optimize Array for Optimize Array for field, then
M o d e M o d e
M o d e field displays M i r r o r M o d e
R A I D c o n f i g u r a t i o n a n d R A I D c o n f i g u r a t i o n a n d
R A I D c o n f i g u r a t i o n a n d R A I D c o n f i g u r a t i o n a n d d r i v e r i n s t a l l a t i o n R A I D c o n f i g u r a t i o n a n d
A u t o A u t o
A u t o A u t o
M i r r o r/ / / / / M i r r o r M i r r o r
M i r r o r
d r i v e r i n s t a l l a t i o n d r i v e r i n s t a l l a t i o n
d r i v e r i n s t a l l a t i o n d r i v e r i n s t a l l a t i o n