Table of Contents
Advertisement
6.
A pop-up message appears, warning you that all existing data on the
hard disk drives will be deleted. Press <Y>.
7.
After you have created the RAID 0+1 set, press any key to reboot the
system.
During POST, the FastTrak S150 TX4™ BIOS checks and displays the
disk array information.
8.
Use the FDISK utility to format the array as a single hard drive.
9.
After you have formatted the arrayed drives, install an operating
system (OS). The OS will treat the RAID 0+1 set as a single drive unit.
R A I D c o n f i g u r a t i o n a n d d r i v e r i n s t a l l a t i o n
R A I D c o n f i g u r a t i o n a n d d r i v e r i n s t a l l a t i o n
R A I D c o n f i g u r a t i o n a n d d r i v e r i n s t a l l a t i o n
R A I D c o n f i g u r a t i o n a n d d r i v e r i n s t a l l a t i o n
R A I D c o n f i g u r a t i o n a n d d r i v e r i n s t a l l a t i o n
3 3
3 3
3 3
3 3
3 3
Advertisement
Table of Contents
