Reconnecting; Opening/Saving Pictures; Displaying Connection Information - Canon VB101 User Manual

Panorama Creation Tool

Reconnecting

Reconnections are made when a connection with the VB101 has been cut.

Opening/Saving Pictures

Panorama pictures can be opened from picture files or saved as picture files.

Displaying Connection Information

Connection information during connection with the VB101 can be displayed.
c
Note
72
G Panorama pictures must be updated when the location where the VC-C4/
VC-C4R is placed has been changed or when the model has been changed
(from a VC-C4 to a VC-C4R, for instance).
G While the Panorama Creation tool is starting up, the video capture size (→
P.43) automatically becomes 160 x 120. It returns to the original specified
size when you exit this tool.
To make a reconnection, choose Reconnect from
the File menu.
To retrieve a picture file and use it for a panorama
picture, choose Open from the File menu. When the
dialog box appears, select the file you want to use.
To save a captured panorama picture as a picture
file, choose Save from the File menu. When the
dialog box appears, select the folder where the file is
to be saved and enter the file name.
In both cases, only the JPEG format is supported.
Choose Connect Information from the Server menu
and a dialog box showing the connection information
appears.
The IP address that was set in the VB101 is
displayed in the "Host name" (→ P.38). The "Video
Transmission port" and "The camera Control Port"
that were set on page 55 and the "HTTP port" that
was set on page 57 are all displayed.