Canon VB101 User Manual page 147

GA007 View restriction setting error (warning)
inconsistent view restriction for camera[%1]
Message
Camera number (1-4)
%1
Explanation The view restrictions settings are corrupted.
The camera control functions on the affected camera cannot be used.
Restore the factory default settings or reset the view restrictions.
Response
GA008 Compatibility error in the view restrictions settings (warning)
unacceptable view restriction for camera[%1]
Message
Camera number (1-4)
%1
Even in the telephoto field of view, the view restriction settings cannot be satisfied in the horizontal or vertical direction. When this occurs,
Explanation
the zoom setting is fixed at the telephoto field of view, and camera head control is prohibited in directions that do not satisfy the permitted field of view restrictions.
Set appropriate values for the view restrictions.
Response
GA010 Camera control driver start and stop (info)
%1 driver for camera[%2] %3
Message
Camera type (Canon VC-C1|Canon VC-C3|Canon VC-C4|Canon VC-C4R)
%1
Camera number (1-4)
%2
started|stopped
%3
Explanation The camera control device was detected and the driver started up,
or a camera control device error was detected and the driver stopped.
GA011 Camera control device error (warning)
%1[%2] malfunction (%3)
Message
Camera type (VC-C1|VC-C3|VC-C4)
%1
Camera number (1-4)
%2
Error (read|write|timeout|...)
%3
Explanation Camera control device I/O error.
There is a malfunction if it does not reset automatically. Contact an authorized
Response
Canon service representative.
GA014 Access prohibited due to host restriction (notice)
%1@%2 access denied
Message
Client type (LS)
%1
Client host IP address
%2
Explanation Access from the client was denied due to host restrictions . (LS indicates a WebView client.
Normally, the same message is displayed several times.)
Log Messages
7
147