Canon VB101 User Manual page 151

GP003 Memory card error (warning)
AUTOMNT: cannot mount %1 on %2
Message
Device name
%1
Mount point
%2
Explanation Mount processing was cancelled due to a memory card error.
Replace the memory card.
Response
GP004 Device busy (err)
AUTOMNT: %1: device is busy
Message
Device name
%1
Explanation The card was unmounted during file access. This does not occur during normal operation.
If this occurred when administration tools were used to unmount the card, reboot.
Response
GP005 Card initialization failed in card slot A (warning)
ENABLER:slota enable err
Message
Explanation Card information read from the card inserted in card slot A failed.
Re-insert the card or replace the card.
Response
GP006 Card initialization failed in card slot B (warning)
ENABLER:slotb enable err
Message
Card information read from the card inserted in slot B failed.
Explanation
Re-insert the card or replace the card.
Response
GP009 Memory card read error (err)
PCMCIA ATA Card(Slot%1 sector %2): Read Sector Error
Message
%1 Slot (A|B)
Sector number
%2
A sector read error occurred. The card may be damaged.
Explanation
Check the memory card and, if necessary, reformat the card.
Response
If there is a physical fault on the card, replace the card.
GP010 Memory card write error (err)
PCMCIA ATA Card(Slot%1 sector %2): Write Sector Error
Message
%1 Slot (A|B)
Sector number
%2
A sector write error occurred. The card may be damaged.
Explanation
Check the memory card and, if necessary, reformat the card.
Response
If there is a physical fault on the card, replace the card.
Log Messages
7
151