Canon VB101 User Manual page 148

Network camera server
Hide thumbs Also See for VB101:
Table of Contents

Advertisement

Log Messages
GA016 Amount of transmitted video data (info)
Message
%1
%2
%3
%4
%5
Explanation
GA022 Applet archive load failure (warning)
Message
%1
Explanation
Response
GA023 Status change of external input devices (err)
Message
%1
%2
Explanation
GA024 Picture recording suspended and restarted (notice)
Message
%1
Explanation
148
%1@%2 %3 frames/%4 bytes in %5 seconds
Client type (LS/D | LS/H)
Client host IP address
Number of frames
Number of bytes
Video transmission time
This shows the results of video transmission for a video transmission client.
archive/%1 not found
Applet archive name (glimpse.cab | glimpse.zip | lvapplet.cab | lvapplet.zip |
imagemap.gif | snapanim.cab | snapanim.zip | digits.gif)
The applet archive file does not exist or is corrupted.
Copy the missing (or damaged) file in the "/archive" applet from the CD-ROM and reboot.
The original applet archive file is in the CD-ROM.
a %1 detected at %2
external device input change (front-edge | rear-edge | pulse | notch)
external device terminal (In1 | In2)
A change was detected at external device terminal In1 or In2. "front edge" denotes OFF → ON,
"rear-edge" denotes "ON → OFF, "pulse" denotes OFF → ON → OFF,
and notch denotes ON → OFF → ON. "pulse" and "notch" are brief (10-20 milliseconds)
ON and OFF periods detected during OFF and ON states respectively.
picture recording %1
suspended | recovered
Picture recording stopped because of error or picture recording restarted because of error recovery.
Error details will be output as A025.

Advertisement

Table of Contents

Troubleshooting

loading

Table of Contents