Table of Contents
Advertisement
Security System Operation (cont'd)
How to Disarm Using a Keyswitch
To disarm the partition, turn the key to the right and release. If an alarm has
occurred, the red light will be flashing rapidly (memory of alarm).
How to Check the Status of Other Partitions
This system supports between one and eight Partitions (as configured by your
installer.) Partitioning enables a single physical alarm system to control up to eight
areas of protection (partitions) depending on the system you have purchased. Each
Symphony/Symphony-i and Keypad is assigned a default partition for display
purposes, and will show only that partition's information.
For example, if your physical site is a four-apartment housing unit, your alarm
system may be configured with four partitions. Each apartment's zones (door,
windows, smoke detectors, etc.) are assigned to separate partitions, giving each
apartment independent arming/disarming control of its own partition (area). A
landlord or manager may be granted access to all partitions, so he/she can control
the entire system.
If a user is so authorized, a Symphony/Symphony-i or Keypad in one partition can
be used to perform system functions in another partition. (Note that only those
partitions authorized and programmed by the installer can be accessed in this
manner.)
To check the status of other partitions perform the following:
24
SCREEN
ACTION
1. From the "Home" screen press the
Security button to display the "Arming" screen.
Advertisement
Table of Contents
