How To Remove Bypassed Zones - Honeywell Ademco 8132-i User Manual

How to Remove Bypassed Zones

A bypassed zone will automatically be unbypassed when you disarm the system. If
the system is disarmed and a zone is bypassed, you can remove the bypass as
follows:
SCREEN
Security System Operation (Cont'd)
1. View bypassed zones by pressing the
Show Zones button. The "Zones" screen is
displayed.
2. Remove zone bypasses by pressing the
Clear Bypasses button.
3. The "User Authorization" screen is displayed
with the instructions To clear bypass, enter
code.
NOTE: A zone cannot be unbypassed while
the system is armed.
Enter your 4-digit user code. The "Zones"
screen is displayed showing the system as
Ready to Arm.
NOTE: This will not occur if any zone(s) is
open (not ready).
ACTION
21