Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for METREL MI 2142
Summarization of Contents
General Description of AlphaPAT MI 2142
Important Safety Warnings
Crucial safety warnings for operator and equipment protection during use.
Applied Standards and Compliance
Lists the safety and EMC standards the instrument adheres to.
Instrument Description and Controls
Front Panel Overview
Details the buttons, display, and controls on the instrument's front panel.
Connector Panels and Ports
Identifies and explains the function of all instrument connectors.
Bottom Side Features
Describes components and features located on the bottom of the instrument.
Safety Pre-Tests Explained
Explains the pre-tests performed by the instrument to ensure safe operation.
Instrument Display Messages
Interprets symbols and messages displayed on the instrument screen.
Technical Specifications
Earth Bond Resistance Specifications
Detailed specifications for earth bond resistance measurement.
Insulation Resistance Specifications
Detailed specifications for insulation resistance measurement.
Substitute Leakage Current Specifications
Detailed specifications for substitute leakage current measurement.
Leakage Current and Apparent Power Specs
Specifications for leakage current and apparent power tests.
Touch Leakage Current Specifications
Detailed specifications for touch leakage current measurement.
Polarity Test Specifications
Specifications for the instrument's polarity test function.
TRMS Current Measurement Specifications
Specifications for TRMS current measurement using a clamp.
General Instrument Specifications
General data including supply voltage, dimensions, and memory.
Main Menu and Test Modes
Accessing Help Menus
Instructions on how to enter and use the instrument's help menus.
Navigating the Main Menu
Guide to selecting instrument functions from the main menu.
Single Test Mode Overview
Introduction to performing individual tests manually.
Autotest Shortcut Menu
How to select and perform pre-defined autotest sequences.
Autotest Custom Menu
How to create and manage user-defined autotest sequences.
Recall Results Menu
How to search for and recall stored measurement results.
Autotest TAG Menu
Using RFID TAGs for autotest sequences and results.
Setup Menu Configuration
How to configure general instrument parameters and settings.
Performing Measurements
Single Test Mode Operation
Step-by-step guide to conducting measurements in single test mode.
Earth Bond Resistance Measurement
Explains the purpose and procedure for earth bond resistance testing.
Insulation Resistance Measurement
Explains the purpose and procedure for insulation resistance testing.
Substitute Leakage Current Measurement
Explains the purpose and procedure for substitute leakage current testing.
Leakage Current and Apparent Power
Explains purpose and procedure for leakage current and apparent power tests.
Touch Leakage Current Measurement
Explains the purpose and procedure for touch leakage current testing.
Polarity Test
Explains the purpose and procedure for polarity testing of mains cables.
TRMS Current Measurement
Explains the purpose and application of TRMS current measurement.
Autotest Modes
Setting Autotest Shortcut Sequences
Guide to setting up autotest sequences using parameters or codes.
Setting Autotest Parameters
Details on configuring parameters for autotest sequences.
Setting Autotest Sequence via Barcode
Using a barcode reader to set autotest sequences.
Viewing Autotest Sequence Parameters
How to view the parameters of a selected autotest sequence.
Starting Autotest Shortcut Sequences
How to initiate a pre-defined autotest sequence.
Autotest Custom Menu Operation
How to create, edit, and manage user-defined autotest sequences.
Performing Autotest Sequences
Describes the sequence of tests performed in autotest modes.
Saving and Recalling Autotest Results
Autotest Save Results Menu
Accessing the menu to save completed autotest results.
Viewing Autotest Sequence Results
Viewing the detailed results of a performed autotest sequence.
Saving Autotest Sequence Results
Adding appliance name and notes to saved autotest results.
Recall Results Menu
Accessing the menu to recall stored measurement results.
Searching and Recalling Results
Searching for and retrieving specific stored autotest results.
Downloading or Sending Results
Sending saved autotest results to PC, printer, or RFID TAG.
Deleting Saved Autotest Results
Procedures for deleting stored autotest results from memory.
Measuring 110 V Appliances
Using the 110V Adapter
Information on using the 110 V adapter for testing low-voltage appliances.
Performing Measurements with 110V Adapter
Steps for conducting measurements using the 110 V adapter.
Other Instrument Operations
Setup Menu and Configuration
Accessing and using the instrument's setup menu for configuration.
Setting Date and Time
How to set the instrument's date and time.
Display Contrast Adjustment
Adjusting the screen contrast for better readability.
Language Selection
Changing the display language of the instrument.
Viewing Instrument Data
Accessing and viewing instrument identification and version data.
Serial Communication Port Settings
Configuring serial communication port settings, like baud rate.
Reset Instrument Settings
Restoring instrument settings to their original default values.
Maintenance and Care
Periodic Calibration Recommendation
Importance and recommendation for regular instrument calibration.
Fuses and Replacement Procedures
Information about fuses, their types, and replacement procedures.
Service and Support Information
Information on obtaining service and repairs for the instrument.
Cleaning the Instrument
Instructions on how to properly clean the instrument.
Instrument Set and Accessories
Standard Included Items
Lists the items included in the standard package with the instrument.
Optional Accessories Available
Lists accessories available for separate purchase.
Appendix A: Autotest Parameter Details
Autotest Shortcut Parameters Explained
Details on parameters used for configuring autotest shortcuts.
Appliance Type and Safety Class Parameters
Information on appliance types and safety classes for testing.
Supply Cord and Fuse Parameters
Parameters related to supply cord and appliance fuse ratings.
Appendix B: Autotest Shortcut Codes
Autotest Shortcut Code Table
A table listing autotest shortcut codes and their associated parameters.
Need help?
Do you have a question about the MI 2142 and is the answer not in the manual?
Questions and answers