Related Manuals for IMKO SONO-WZ
Summarization of Contents
SONO-DIS Handheld Device
SONO-DIS General Notices & Environmental Conditions
Covers intended use, accumulator, charging, and ambient temperature limits.
Control Elements Overview
Details the function of buttons, display symbols, and messages on the SONO-DIS.
Initial Commissioning Steps
Guide for first-time setup, including charging the accumulator and connecting a sensor.
Device Operation Guide
Explains general operation buttons, symbols, and turning the device on/off.
SONO-DIS Technical Specifications
Provides specifications like dimensions, power consumption, operating temperature, and interfaces.
SONO-DIS with SONO-WZ Concrete Measurement
General Settings for SONO-WZ
Configuration options for language, probe detection, auto-power-off, display settings.
Concrete Specific Base Parameters
Setting density, CHAR, and G-Set parameters for accurate concrete measurements.
Standard Measurement Mode "Average"
How to conduct measurements and interpret results in average mode for concrete.
5 Steps for Successful Concrete Measurement
Practical guide for accurate concrete measurements, including handling and probe insertion.
Water-Cement Ratio Theory and Practice
Explains water/liquid proportions and how to adjust the G-Set parameter for W/C ratio.
Recipe Handling and Archiving
Guidance on managing and archiving material recipes and settings for concrete.
Construction Site Test Form
Template for recording test data and device settings for site tests.
SONO-WZ Probe Technical Data
Detailed specifications for the SONO-WZ probe, including measuring ranges and accuracy.
SONO-DIS with SONO-M1 Sand & Gravel Measurement
General Settings for SONO-M1
Configuring SONO-DIS operating modes, calibration, and language for SONO-M1.
Measurement Volume and Probe Dimensions
Describes the effective measurement range and physical dimensions of the SONO-M1 probe.
How to Use SONO-DIS Kit with SONO-M1
Instructions for taking measurements in sand, gravel, and laboratory samples with SONO-M1.
SONO-M1 Probe Technical Data
Specifications for the SONO-M1 probe, including measurement ranges, accuracy, and materials.
System Maintenance and Safety
Exchange of Probe Rods
Step-by-step guide on how to replace the probe rods on the sensor.
Important Safety Notes
Safety warnings, intended use, and precautions against modifications and hazards.
Need help?
Do you have a question about the SONO-WZ and is the answer not in the manual?
Questions and answers