Using The Audio Output Being Played Back - Yamaha YSP-3000bl Owner's Manual

5
Press TEST when you have completed all
your adjustments.
TEST
CB
Notes,
• All channel levels cannot be adjusted when the 2-channel or 5-
channel stereo playback (see page 60), My Beam (see page 61),
or My Surround (see page 55) is selected as the beam mode.
• "FRONT UR" cannot be adjusted when Stereo plus 3 Beam is
selected as the beam mode (see page 55).
• "FRONT LIR" are automatically adjusted depending on the
settings of the other channels when Stereo plus 3 Beam or
stereo playback is selected as the beam mode (see pages 55 and
60).
,0,
.=-t'fl:.
If the level of a particular channel cannot be adjusted, "- -<lB"
appears in the front panel display.
Using the audio output being
played back
You can also manually adjust the channel levels while
playing back an input source such as a DVD.
O~70
i"f.
<l
e.
I>
lAY
Y.P - . x l _
o
V'
0
~@ffi
IIIUTI:
TV INPUT TV IKIfE
CJ CJ CJ
CIt LEVIL TIlT
~
II!T"
c::J
C)
OD-
(U.S.A. and Canada models)
Adjusting the audio balance
1
Set the operation mode selector to YSP.
2
Press CH LEVEL repeatedly (or press
CH LEVEL and
.6.
I V") to select the channel
you want to adjust.
The front panel display changes as follows.
CH LEVEL
CB
or
CH LEVEL
CB
+
FPONT L +1.0dB
~
CENTEF.: - 2 . .5dB
~
FPONT P +1.0dB
~
SUP. P +2.0dB
~
SUP. L +2.0dB
~
Sb.lFP --dB
Note'!
"SWFR" is available only when a subwoofer is connected to
this unit and SWFR is selected for BASS OUT in SOUND
MENU (see page 78).
85
En
I