Yamaha YSP-3000bl Owner's Manual page 31

Connections
If your component supports optical digital connections, connect the optical digital output jack on your component
(e.g., DVD player/recorder) to the AUX 1 OPTICAL DIGITAL INPUT jack on this unit. If your component does not
support optical digital connections, connect the coaxial digital output jack on your component to the AUX 2 COAXIAL
DIGITAL INPUT jack on this unit.
If your component does not support any digital connections, connect the analog audio output jacks on your component
(e.g., VCR) to the AUX 1 AUDIO INPUT jacks on this unit.
.:-'.':.
To prevent the optical cable from being unplugged, affix the optical cable in the supplied cable clamp (see page 20).
If you make analog apd digital audio connections at the same time as shown in the illustration below, the digital audio signals input at
the AUX I OPTICAL DIGITAL INPUT or AUX 2 COAXIAL DIGITAL INPUT jack take priority over the analog audio signals input
at the AUX I AUDIO INPUT jacks.
Rear panel of this unit
(U.S.A. and Canada models)
[C
ANTENNA
1 [
AUDIO INPUT
~
OUT-
o
VIDEO
€-
((!) «!)
D~
@ @
~K f~~-
~
DIGITAL INPUTl
AUX2 DVD
(jfCOAXJAL
«!)
rG~OPOCAL~
f"Xl
~~
o
XM
@)
IRIN
1
+-+--~--~
R(!)
L~ ~
@
Analog Optical Coaxial
audio digital digital
output output output
...
Video signal to the TV
.Audio
Audio pin cable
Digital audio pin cable
DVD player/recorder, VCR,
game console, CD player, etc.
27
En
I