Yamaha YSP-3000bl Owner's Manual page 18

Controls and functions
@ DVD playerNCR control buttons
Control your DVD player or VCR (see pages 98 and 99).
@ My Beam microphone
Collects the test tones from this unit when using the My
Beam auto-adjust function (see page 61).
@ TV POWER
Turns on the power of your TV or sets it to the standby
mode (see page 97).
@ AVPOWER
Turns on the power of the selected component or sets it to
the standby mode (see pages 98 and 99).
®
INPUT1
Switches the input source on your TV (see page 97).
@
MACRO
Use to set the TV macro (see page 1(0).
®
""I.
Switches the preset station number (l to 8) when this unit
is receiving an FM broadcast or XM channel (see
page 52).
@ CAT
Switches the preset station group (A to E) when this unit is
receiving an FM broadcast or XM channel (see page 52).
@
SLEEP
Sets the sleep timer (see page 68).
®
INPUTMODE
Toggles between input modes (AUTO, DTS, and
ANALOG) (see page 87).
®
Beam mode buttons
Change the beam mode settings (see pages 54, 60, and
61).
®
SUR. DECODE
Selects the surround mode for playback (see page 57).
®
MENU
Displays the setup menu on your TV monitor (see
pages 37 and 73).
®
Operation mode selector
Selects the operation mode of this unit. Select YSP when
operating this unit and select TV/AV when operating your
TV or other AV components.
14
En
@
RETURN
Selects sleep timer settings or returns to the previous SET
MENU screen.
®
TV VOL
+1-
Adjusts the volume level of your TV (see page 97).
@ CH
+1-
Changes the channels of your TV, digital satellite tuner,
cable TV tuner, or VCR (see pages 97 and 99).
@ TV MUTE, CODE SET
Mutes the audio output of your TV (see page 97).
Sets up remote control codes (see page 96).
The functions
@
and
@
are available only when the FMIXM
stations are preset.