Sound Menu - Yamaha YSP-3000bl Owner's Manual

MANUAL SETUP
Use to manually adjust the various parameters related to
the sound output.
SET MENU ~ MANUAL SETUP ~ SOUND MENU
~
R)TONE CONTROL
B)SUBWOOFER SET
C)
MUTE LEVEL
D)RUDIO DELRY
E)ROOM EQ
F)DD/DTS DynaMic Range
GHruBass
["J/[TJ:Up/Down
[ENTERJ:Enter
• TONE CONTROL (Tone control)
You can adjust the tonal quality of sound beams.
R:l
Tm,IE CmHROL
+
~ TREBLE·····0dB --~~--
- +
BRSS·······0dB
--~~--
[..J/[TJ:Up/Down
[~J/[~J:Sel
[ENTERJ:Return
TREBLE (Treble)
Use to adjust the high-frequency response.
Choices: -12 dB to +12 dB
Initial setting: 0 dB
BASS (Bass)
Use to adjust the low-frequency response.
Choices: -12 dB to +12 dB
Initial setting: 0 dB
• SUBWOOFER SET (Subwoofer settings)
Use to manually adjust the various subwoofer
settings.
B)
SUB~,IOOFE~~
SET
BASS OUT (Bass out)
Low-frequency (bass) signals can be directed to the
subwoofer and/or the front left and right channels. This
setting also determines the routing of LFE (low-frequency
effect) signals found in Dolby Digital or DTS sources.
Choices: SWFR (Subwoofer), FRONT
• Select SWFR if you connect a subwoofer. LFE and
low-frequency signals from other channels are directed
to the subwoofer.
• Select FRONT if you do not use a subwoofer. LFE and
low-frequency signals from other channels are directed
to the front left and right channels.
CROSS OVER (Crossover)
When BASS OUT is set to SWFR, you can use this
feature to select a crossover (cutoff) frequency for all low-
frequency signals. All frequencies below the selected
frequency will be sent to the subwoofer position.
Choices: 80Hz, 100Hz, 120Hz
LFE LEVEL (Low-frequency effect level)
Select to adjust the output level of the LFE (low-frequency
effect) channel according to the capacity of your
subwoofer. The LFE channel carries low-frequency
special effects which are only added to certain scenes.
This setting is effective only when this unit decodes Dolby
Digital or DTS signals.
Choices: -20 to 0 dB
DISTANCE (Distance)
Select to adjust the distance of the subwoofer from the
listening position.
Choices: 0.3 to 15.0 m (1.0 ft to 50.0 ft)
Initial setting: 3.0 m (10.0 ft)
• MUTE LEVEL (Muting level)
Use to adjust how much the mute function reduces the
volume level.
Choices: MUTE, -20 dB
• Select MUTE to completely halt all sound output.
• Select -20 dB to reduce the current volume level by
20 dB.
cmUTE LEI.)EL
[~J/[~J:Select
.
[ENTERJ:Return
~
BRSS OUT····· FRONT
CROSS OVER··· 100Hz
LFE LEUEL······0dB
DISTRNCE······3.0M
["J/[TJ:Up/Down
[~J/[~J:Sel
[ENTERJ:Return
78
En
~MUTE
-20dB