Automatic tuning is effective when the radio station
signals are strong and there is no interference.
1
Set the operation mode selector to TV/AV.
2
Press FM to select FM as the input source.
"FM" appears in the front panel display.
4
Press ENTRY; (...c:,./V'") once to begin
automatic tuning.
When this unit is tuned into an FM station, the
TUNED indicator lights up and the frequency of the
station appears in the front panel display.
• Press...c:,. to tune into a higher frequency.
• Press V'" to tune into a lower frequency.
.:'ci<:.
• You can also press INPUT on the front panel repeatedly to
select FM as the input source.
• If "XM" appears in the front panel display, press FMIXM
again to display "FM" (U.S.A. and Canada models only).
3
Press SEARCH repeatedly until the AUTO
indicator lights up in the front panel display.
SEARCH
q
. .
Lights up
I
....
""'/
/,
....
R lJFN 88.9 NHz
I
No colon
<:)
If a colon <:) appears in the front panel display, tuning
is not available. Press PRESETrruNE to
turn
the
colon <:) off.
If the desired FM station signal is weak, tune into it
manually.
Manual tuning automatically switches the tuner to the monaural
reception mode to increase the signal quality.
1
Set the operation mode selector to TV/AV.
2
Press FM to select FM as the input source.
"FM" appears in the front panel display.
~'ci<:.
• You can also press INPUT on the front panel repeatedly to
select FM as the input source.
• If "XM" appears in the front panel display, press FMIXM
again to display "FM" (U.S.A. and Canada models only).
49
En
I