Yamaha YSP-3000bl Owner's Manual page 16

Controls and functions
This section describes the functions of the remote control .
used to control FM, Radio Data System, or iPod when the
TV/AV mode is selected with the operation mode selector
(CD).
Note that the Radio Data System controls are
available for Europe model only, and the iPod controls are
available for Australia model only.
_1IlIl _ _
~oe0
12
En
CD
PRESETfTUNE
FM: Switches between the preset search mode and the
frequency search mode (see pages 49 to 52).
®
Numeric buttons
FM: Enter numbers.
@ Cursor buttons
6.
I
7
I
<l/l>,
ENTER
FM: Use ENTRY
~
(6./7) to change the preset station
number (1 to 8) or frequency level (see pages 49 to 52).
Use A-E
0
(<l/l»
to change the preset station group (A to
E) (see pages 51 and 52). Use ENtER to confirm the input
above.
These functions are also available when this unit is receiving the
Radio Data System (see page 52) or playing back your iPod (see
page 2 in the Reference Guide).
G) DISPLAY
Radio Data System and iPod: Displays information when
this unit is receiving the Radio Data System (see page 52)
or playing back your iPod (see page 2 in the Reference
Guide).
®
MEMORY
FM: Stores the preset stations (see pages 50 and 51).
:(j{~
This function is also available when this unit is receiving the
Radio Data System (see page 52).
®
SEARCH
FM: Switches between automatic and manual tuning (see
page 49).
CD
Operation mode selector
Selects the operation mode of this unit. Select YSP when
operating this unit and select TV/AV when operating your
TV or other AV components.