JVC VN-T216U Instructions Manual page 44

The user can choose Synchronization Mode here from three different types.
Set Date and Time Manually
Set up the camera's date and time in the Set Date and Time Manually field.
Figure 4-40 Set Date and Time Manually
Set Date and Time by NTP Server
1. Time Zone: Select the time zone where your camera is located.
2. NTP Server: Select NTP in the Synchronization Mode. If "NTP" is selected,
the date and time will be synchronized by the NTP server.
disable SD recording function before you enable NTP synchronization mode.
3. Time Adjustment Period :Users can choose time adjustment intervals
4. Finally click "Save &Test"
Figure 4-41 Set Date and Time By NTP Server
Daylight
Figure 4-42 Daylight
Daylight Saving
Select "ON" to activate the daylight-saving function if you are in a daylight saving
time zone (effective for NTP mode only), and then choose the starting time ,ending
time and time adjustment.
Please click the "Save" button to save your settings. You can also
click the left button "Reset to Default" to set all the data and options
Note
as defaults.
Note: Please make sure
43