Table of Contents
Advertisement
5. API for Acquiring/Changing Parameters of VN-E4 _
5.5. Alarm Environment Setting
The APIs below are related to alarm environment setting. These are equivalent to the features on the Alarm Environment page of the WEB
setting page. Refer to the instruction manual for details on the Alarm Environment page.
Acquiring SMTP Server Address Setting from VN-E4
Format
Example of Response
Response example
when setting field is
left blank
Interpretation
Allowed users
Setting SMTP Server Address for VN-E4
Format
Example
Example of Response
Interpretation
Allowed users
Acquiring SMTP Server Port Number Setting from VN-E4
Format
Example of Response
Interpretation
Allowed users
Setting SMTP Server Port Number for VN-E4
Format
Example
Example of Response
Interpretation
Allowed users
/api/param?application.smtp.host
application.smtp.host=10.0.0.200&200 OK
application.smtp.host=&200 OK
Acquire the address setting of the SMTP server.
admin, operator, user
/api/param?application.smtp.host=data
/api/param?application.smtp.host=10.0.0.200
application.smtp.host&200 OK
Change the address setting of the SMTP server. Specify the IP address or FQDN. The maximum FQDN size is
60 bytes. Specify as 0.0.0.0 when the SMTP server is not set. It is also possible to leave the setting field blank
as follows.
/api/param?application.smtp.host=%00
admin, operator
/api/param?application.smtp.port
application.smtp.port=25&200 OK
Acquire the port number setting of the SMTP server.
admin, operator, user
/api/param?application.smtp.port=data
/api/param?application.smtp.port=25
application.smtp.port&200 OK
Change the port number setting of the SMTP server.
admin, operator
5.5. Alarm Environment Setting
31
Advertisement
Table of Contents
