Setting Jpeg Parameters Added To Ftp From Vn-E4; Acquiring Alarm Action From Vn-E4 - JVC VN-E4U - 4 Channel Network Encoder Api Manual

5. API for Acquiring/Changing Parameters of VN-E4 _
Example
Example of Response
Interpretation

Setting JPEG Parameters Added to FTP from VN-E4

Format
Example
Example of Response
Interpretation

Acquiring Alarm Action from VN-E4

Format
Example
Example of Response
When acquiring setting of Object 1
Acquisition of input CH:
Acquisition of frame size:
Acquisition of frame rate:
Acquisition of BeforeTrigger: /api/param?application.object(1).prerec
Acquisition of AfterTrigger:
Acquisition of input CH:
Acquisition of frame size:
Acquisition of frame rate:
Acquisition of BeforeTrigger: application.object(1).prerec=2&200 OK
Acquisition of AfterTrigger:
Acquire the parameter of the specified object. This object is used by the API for setting FTP. Specify the
number of object(number) between the range of 1 to 8.
Setting of frame rate:
Setting of BeforeTrigger:
Setting of AfterTrigger:
Set frame rate to 5 fps:
Set BeforeTrigger to 3
seconds:
Set AfterTrigger to 3
seconds:
Setting of frame rate:
Setting of BeforeTrigger:
Setting of AfterTrigger:
Perform setting for the specified object. This object is used by the API for setting FTP. Specify the number of
object(number) between the range of 1 to 8. The maximum value for prerec/postrec is 60. In addition, input
CH and frame size for each object are fixed and cannot be changed.
/api/param?application.event(Number).action
When acquiring action of Alarm No. 1
/api/param?application.event(1).action
application.event(1).action=mailto/somebody@somecompany.com/none/
Message&200 OK
/api/param?application.object(1).source
/api/param?application.object(1).framesize
/api/param?application.object(1).framerate
/api/param?application.object(1).postrec
application.object(1).source=video.input(01)&200
OK
application.object(1).framesize=vga&200 OK
application.object(1).framerate=10&200 OK
application.object(1).postrec=2&200 OK
/api/param?application.object(Number).framerate=data
/api/param?application.object(Number).prerec=data
/api/param?application.object(Number).postrec=data
/api/param?application.object(1).framerate=5
/api/param?application.object(1).prerec=3
/api/param?application.object(1).postrec=3
application.object(1).framerate&200 OK
application.object(1).prerec&200 OK
application.object(1).postrec&200 OK
5.4. Alarm Setting
28