Installation and setup
1. Installation
Use the optional bracket (Model VN-BK30) for installation.
Make the power and network connections after completion of the installa-
tion work.
Caution
Install in a location with sufficient strength to prevent falling.
VN-C3WU units can be installed as shown in the diagram below.
1 Attach the ceiling fixer with the
pointing toward the front of the camera.
3 Attach the drop-prevention wire of the
ceiling fixer to the camera body fixer.
12
hole
P
drop-prevention wire
2 Mount the camera body fixer
on the VN-C3WU.
4 Mount the VN-C3WU on the ceiling fixer
by rotating clockwise, then tighten the
screw of the camera body fixer.