Alarm In/Out Connection - JVC VN-C3WU - Digital Web Color Camera Instructions Manual

3. Alarm IN/OUT connection

Connect external devices to the alarm IN/OUT as shown below.
External
device
OUT 1
Cable connection and disconnection
Press the sensor insert button when connecting and disconnecting cables.
After connecting or disconnecting, make sure the sensor insert button
returns to its original position.
About the alarm IN/OUT connection cables
• Length: use cables with a length of 50m or less.
• Recommended model: UL1007, UL1015 or equivalent cable with wire
equivalent to AWG #22 - AWG #18.
Caution
External noise may affect the alarm working properly even with a cable
length of 50m or less. In such cases, it is necessary to either change to the
use of shielded cable to prevent influence by noise or to change the wiring
route to avoid passing close to the source of the noise.
14
External
device
OUT 2
Sensor insert button
External
device
IN