Table of Contents
Advertisement
Quick Links
SCN65 / SCN66
Pneumatic Coil Nailer
OPERATIONS and MAINTENANCE MANUAL
CE DECLARATION OF CONFORMITY
BEFORE OPERATING THIS TOOL, ALL OPERATORS SHOULD READ AND STUDY
THIS MANUAL TO UNDERSTAND AND FOLLOW THE SAFETY WARNINGS AND
INSTRUCTIONS. KEEP THESE INSTRUCTIONS WITH THE TOOL FOR FUTURE
REFERENCE.
Everwin Pneumatic Corp.
19'/3/19
Advertisement
Table of Contents
Related Manuals for Everwin SCN66
Summarization of Contents
1-Year Limited Warranty
Warranty Exclusions
Lists specific items and conditions not covered by the limited warranty.
Grounds for Industrial / Production Tool Coverage
Details warranty coverage for industrial/production tools, including limitations and requirements.
CE Declaration of Conformity
Machine Type and Details
Lists the specific machine types, name, place, and date of issue for the CE declaration.
Safety Instructions
Eye Protection Requirements
Mandates ANSI/CE compliant eye protection against flying particles for operators and others.
Air Supply and Connections Safety
Warns against improper air sources, pressure limits, and connector issues to prevent injury.
Nail Loading Safety
Provides critical safety warnings for loading the tool to prevent accidental firing.
Safe Operation Practices
Details essential safety rules for handling and operating the pneumatic nailer to prevent injury.
Tool Maintenance Safety
Advises caution and adherence to warnings when working on or maintaining the tool.
Specifications
Tool Specifications Overview
Details dimensions, weight, capacity, and air fitting for SCN65 and SCN66 models.
Fastener Specifications
Lists nail length, shank diameter, head diameter, shank type, and collation for fasteners.
Operating Pressure Range
Specifies the recommended operating pressure range for optimal fastener performance.
Technical Data
Air Consumption Details
Explains tool air consumption rate and how to calculate requirements based on usage.
Noise Level Data
Provides A-weighted sound power and pressure levels as per EN12549 standard.
Operation Modes
Smart Trigger System
Describes the dual-purpose smart trigger system identified by a red trigger.
Continuous Bump Fire Operation
Explains the bump fire mode using the contact trip and trigger for rapid nailing.
Single Sequential Fire Operation
Details the sequential fire mode requiring contact arm and trigger activation for single shots.
Sequential Trip Operation
Explains the sequential trip system (grey trigger) for precise fastener placement.
Air Supply and Connections Guidelines
Air Supply Source Restrictions
Prohibits oxygen, combustible, or bottled gases; emphasizes clean, regulated compressed air.
Fittings and Hoses Requirements
Specifies requirements for tool fittings and air hoses, including pressure ratings and quick disconnects.
Regulator and Operating Pressure Control
Details the need for a regulator and the safe operating pressure range (0-125 PSI).
Air Filter Importance
Highlights the role of a filter in maintaining performance and reducing wear by providing clean air.
Lubrication Guidelines
Air Tool Lubrication
Recommends air tool oil via air line or fitting; warns against detergent oils.
Cold Weather Operation
Provides advice for cold weather, including lubricant recommendations and storage precautions.
Nail Loading Safety
Preventing Accidental Nail Loading Injuries
Lists specific actions to avoid during nail loading to prevent injury.
Tool Operation Overview
Pre-Operation Checks
Emphasizes reading warnings and identifying the operating system before handling the tool.
Trigger Operation Warnings
Warns against holding the trigger pulled on contact trip tools except during fastening.
Tool Operation Check
Rapid Fire Operation Check
Procedure to verify the tool's rapid fire functionality and safety interlocks.
Single Fire Operation Check
Procedure to verify the tool's single fire functionality and safety interlocks.
Maintaining the Pneumatic Tool
Replacement Parts
Guidelines for using genuine parts and ensuring proper fit and performance.
Assembly Procedure for Seals
Instructions for lubricating and assembling internal seals during repair.
Air Pressure and Volume Considerations
Explains how inadequate air volume or supply issues affect tool performance.
Driver Maintenance Instructions
Addressing Worn Driver Issues
Describes symptoms of a worn driver and the possibility of length adjustment for redressing.
Need help?
Do you have a question about the SCN66 and is the answer not in the manual?
Questions and answers