JVC TK-C700U - Color Cctv Camera Instructions Manual page 7

6.
Camera body cover
Claw
Setting
switches
Cover
Ceiling mount on the ceiling
7.
Pull
out.
Drop prevention
wire
Ceiling mount
on the ceiling
8.
Lock screw
Claw
RELEASE LOCK
Indication
mark
RELEASE LOCK
Hook for attaching
the Drop prevention
wire
Camera position
alignment mark
Camera position
alignment mark
Camera body
Installation (continued)
6.
Attach the camera body cover.
Align "RELEASE on the camera body cover with the indi-
cation mark on the camera body, fit the cover onto the cam-
era body, then rotate the cover clockwise until "LOCK" is
indicated.
• Check that the three claws on the cover are locked onto
the camera body and that there is no clearance between
the cover and the camera body.
7.
Attaching the drop prevention wire.
As shown in the illustration, pull out the drop prevention
wire from the ceiling mount and engage it with the drop
prevention wire hook on the back of the camera.
CAUTION
Be sure to connect the drop prevention wire. Otherwise the
camera body may drop from the ceiling.
8.
Mount the camera body.
1) Ensure that the lock screw on the ceiling mount is loose.
2) Align the camera position alignment mark (^) on the ceil-
ing mount with the camera position alignment mark (5) on
the camera body and fit the camera body into the mount.
3) Rotate the camera body clockwise until it is checked.
Then, check that the camera body clamp is located on the
lock screw on the ceiling mount.
4) Tighten the lock screw.
CAUTION
Be sure to tighten the lock screw fully. Otherwise the cam-
era body may vibrate or drop from the ceiling.
For dismounting the camera from the ceiling, perform steps
1. 8.
to in the reverse order.
Camera clamp
Rotate the camera
body clockwise.
Lock screw
Tighten the lock screw.
7