Konica Minolta PS5000C Operator's Manual page 66

PS5000C Operator's Manual
Error message
"Failed to read the Na3_kwbsha.dat."
"Invalid WB data"
"Invalid Shading data."
"Cannot find the scanner"
5-4
Perform the Shading adjustment and then the White
Balance adjustment procedures.
Perform the White Balance adjustment procedure.
(Refer to Chapter 3 "2.3 White Balance adjustment".)
Perform the Shading adjustment procedure.
(Refer to Chapter 3 "2.2 Shading adjustment".)
Turn off the power switch of the Scanner, and turn it
on again. Restart the personal computer.
Action