Konica Minolta PS5000C Operator's Manual page 46

PS5000C Operator's Manual
14. Bitmap Threshold:
15. Hue/Saturation:
16. Edit:
3-20
Effective only when the Image Mode is "Color Text", "Grayscale Text"
or "Line art (Bitmap)". The threshold to be used to binarize the image
can be set at any value from "0" to "255".
NOTE: Pressing the "Reset" button resets the value to "128".
"Hue", "Saturation", and "Lightness" can be adjusted.
Hue ................................. Adjust from the range of -180 to +180
Saturation/Lightness....... Adjusting the saturation to the + side, the color
NOTE: Clicking the "Reset" button, each value is reset to 0.
Effective only when Book is selected for the original type.
1. Book Frame Masking Deletes the outside area of the image with
Book Frame Masking does not function properly when
NOTE !
•
there is an image less than 2 mm (0.08 inch) from the
edge of the original.
Depending on the density or color of the original, the frame
•
erasing may not function properly. Turn off "Book frame
erase" if any required portion of the image is missing due
to the frame erase function.
2. Centering
NOTE ! Centering does not function properly when the original
center is misaligned 30 mm (1.18 inch) or over from the
center of the book table.
brightness increases, and to the - side, it
decreases the color, becoming closer to gray.
"white" when selecting the larger size than the
original.
Any shift away from the center of the original is
corrected and the scanned image is placed at the
center of the screen.
Centering ON
Frame Masking: OFF
Frame Masking: ON
Centering OFF
Spread mode
Single or Book
Split mode