PS5000C Operator's Manual
9. Power cord:
10. Foot switch/Manual switch
(option):
11. Stopper:
12. Center mark:
13. Cut sheet mark:
14. LED lamp:
2-4
Connects the Scanner to the power outlet.
Press this switch instead of the "SCAN" button on the
"Image Acquisition PS5000C" screen to start scanning.
Used as the reference position for the original. When
placing the original, align its top edge with this position.
Adjust the center of the original (book) to this mark.
Adjust the corner of the original (sheet) to this mark.
Displays the operation condition of the Scanner.
Lit
Green
Stand-by
Red
Scanning
Flash
Saving energy mode
Error