White Balance Control - Honeywell HCCM474M User Manual

MAIN MENU, CONTINUED

White Balance Control

1. Press SET to display the MAIN MENU on the monitor
screen.
2. Position the cursor at WHITE BALANCE and press the left
or right button to toggle through the white balance control
mode. Three white balance control modes can be selected
according to conditions: ATW, AWC, and Manual.
ATW (Auto-Tracking White Balance)
The white balance mode is set to auto-tracking white balance (ATW). This mode accepts different
types of lighting using an automatic tracking system and automatically controls in the color tempera-
ture range of 2400K to 10000K.
Note : The ATW mode may not function properly under the following
REV. B
conditions:
• When shooting with non-standard lighting or lighting with a color
temperature that exceeds the range of the camera.
• When a large part of the scene is occupied with a single color or a
completely red or blue background.
In these situations, set White Balance to the MANUAL mode.
19
MAIN MENU
Lens : DC
AGC : 32dB
Shutter : AUTO
➔
White Balance : ATW
Back Light : OFF
Text Display : OFF
Sync Mode : INT
Special Menu
End
HCMU000878
12/29/03