Honeywell HCCM474M User Manual page 22

MAIN MENU, CONTINUED
BLC Zone Setting
Backlight control uses 6 sensing zones.
The BLC Zone setting is activated on the screen with either the
left or right button to allow the most suitable area to be selected
while observing the monitor. Position the cursor at Back Light
and press SET to select the BLC zones.
Decide on BLC zone numbers for
desired portions of the scene.
1. Press SET to display the BLC zone set.
2. Press the up or down direction buttons to move the cursor
to desired BLC zone.
3. Press the left or right direction buttons to set the sensing
zone in which you want to preserve visibility in important
sections of the scene.
4. After setting, press SET to return to the MAIN MENU.
REV. B
Zone 1 Zone 2
Off Off
Zone 5 Zone 6 Zone 5
Off ON Off
Zone 3 Zone 4
Off Off
22
BLC ZONE SET
➔ Zone Display
Zone 1 :OFF
Zone 2 :OFF
Zone 3 :OFF
Zone 4 :OFF
Zone 5 :OFF
Zone 6 :ON
Press SET to View Zone
BLC ZONE SET
Zone Display
➔ Zone 1
:ON
Zone 2 :OFF
Zone 3 :OFF
Zone 4 :OFF
Zone 5 :OFF
Zone 6 :ON
Press SET to Main Menu
HCMU000878
12/29/03