Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Eaton 5PX 2200 RT2U
Summarization of Contents
IMPORTANT SAFETY INSTRUCTIONS
Certification Standards
Details on the UPS compliance with various international and national certification standards.
Special Symbols
Explanation of symbols used on the UPS to alert users to important safety information.
Safety of Persons
Product Safety
Guidelines for safe UPS installation, operation, and environmental considerations.
Special Precautions
Specific safety measures for handling, storage, and battery module replacement.
1. Introduction
1.1 Environmental protection
Eaton's environmental protection policy, eco-design, and material information.
2. Presentation
2.1 Standard installations
Illustrates tower and rack installation configurations with dimensions and weights.
2.2 Rear panels
Identifies and describes the connectors and ports on the rear of the UPS units.
2.3 Control panel
Overview of the UPS graphical LCD, its buttons, and indicator statuses.
2.4 LCD description
Explains the UPS LCD screen saver and provides a table of status information.
2.5 Display functions
Details menu navigation and the information or functions available on the display.
2.6 User settings
Describes user-configurable settings for language, LCD, alarms, and voltage.
3. Installation
3.1 Unpacking and contents check
Procedure for unpacking the UPS and verifying all included components and accessories.
3.2 Battery module connection
Instructions for safely connecting the internal battery module to the UPS.
3.3 Tower installation
Steps for installing the UPS unit in a vertical tower configuration.
3.4 Rack installation
Guide for mounting the UPS into a 19-inch rack using the provided rails and hardware.
3.5 Communication ports
Details on connecting RS232/USB ports and installing optional communication cards.
3.6 Connection with a FlexPDU (Power Distribution Unit) module (optional)
Instructions for connecting the UPS to a FlexPDU for power distribution.
3.7 Connection with a HotSwap MBP module (optional)
Guide for connecting the UPS to a HotSwap MBP module for maintenance.
HotSwap MBP module operation
Description of the HotSwap MBP module's operation and switch functions.
3.8 UPS connection without a FlexPDU or HotSwap MBP module
Procedure for connecting the UPS directly to the AC power source and loads.
4. Operation
4.1 Start-up and Normal operation
Steps to properly start the UPS and ensure normal operating conditions.
4.2 Starting the UPS on Battery
Procedure for initiating UPS operation using battery power.
4.3 UPS Shutdown
Instructions for safely shutting down the UPS unit.
4.4 Operation on Battery Power
Details on how the UPS functions when supplied by battery power.
Low-battery warning
Information on low-battery indicators and necessary user actions.
End of battery backup time
Description of indicators and actions when the UPS battery backup time expires.
4.5 Return of AC Input Power
How the UPS resumes operation when AC input power is restored.
4.6 UPS remote control functions
Explanation of remote control features like RPO and ROO.
5. Maintenance
5.1 Troubleshooting
Common issues, their causes, and corrective actions for UPS operation.
5.2 Battery-module replacement
Safety recommendations and step-by-step guide for replacing the battery module.
Mounting the new battery module
Instructions for installing the new battery module, emphasizing proper connection.
5.3 Maintenance on a UPS equipped with the HotSwap MBP module
Maintenance procedures for UPS units connected to a HotSwap MBP module.
6. Appendices
6.1 Technical specifications
Detailed technical data for UPS models, including power, voltage, and environmental specs.
6.2 Glossary
Definitions of key terms and acronyms used throughout the manual.
Need help?
Do you have a question about the 5PX 2200 RT2U and is the answer not in the manual?
Questions and answers