Table of Contents
Advertisement
Dimensions: 152.5 (L) x 115.2 (W) x 40.2 (H) mm
Chapter 2.
Hardware Overview
2.1 Rear Panel
CONNECTOR / BUTTON
Reset Default
Power Indicator
Video Output
LAN
Power Connector
TL-SC3000
DESCRIPTION
This button is hidden in the pinhole. Press and hold the reset
button until the network camera reboots. This will reset all
parameters, including the IP address to factory default settings.
When the camera is power-supplied, this indicator will be on as
red.
Connect to the video input connector of your monitor with a video
cable (i.e. a RCA line with the BNC connector, or a coaxial line) for
video output.
* The video cable is optional.
Connect the camera to the network with the supplied RJ45 cable.
Connect the DC 12V adapter for power supply.
4
3GPP Surveillance Camera
Hide quick links:
Advertisement
Table of Contents
