Toolbar Display On The Ie Web Browser - TP-Link TL-SC3000 User Manual

Note:
The supported PC operation systems are Windows 2000 and Windows XP.
Step 1: Key in the IP address used by your network camera in the URL address box, such as
"http://ipcam.dyndns.org", and press Enter. You will be prompted to enter the user name and
password to access the network camera.
If the port number your network camera used is NOT 80, you need to key in the port number
additionally. The format is "http://ipaddress:portnum".
Take dynamic IP type as an example: Host name "ipcam.dyndns.org" / Port number "202". Key
in "http://ipcam.dyndns.org:202" into the URL address box, and press "Enter".
Step 2: Enter the user name and password, the same as the ones used at the Video Viewer, and press
"OK". You will see a similar screen as the following when the login information is correct.

6.2 Toolbar Display on the IE Web Browser

NO. Function
1 Main
ActiveX / Quick Time
TCP / UDP
BEST / HIGH /
NORMAL / LOW
VGA / QVGA
TL-SC3000
Description
According to the type of web browser on your
operating system, choose the ActiveX or QuickTime
controls.
Choose the internet transmission protocol: TCP /
UDP.
Choose the image quality: BEST / HIGH / NORMAL
/ LOW
Choose the image size: VGA (640 × 480) / QVGA
(320 × 240).
43
3GPP Surveillance Camera