Hardware Connection - TP-Link TL-SC3130 User Manual

2-way audio surveillance camera

Hide thumbs Also See for TL-SC3130:

Table of Contents

2.3 Hardware Connection

Before proceeding, confirm that your PC is connected to your router and can access the Internet.

Make sure that your router's DHCP feature is enabled. (Most routers have DHCP turned on by

default.) If DHCP feature is disabled, please refer to the operating instruction included with your

router to enable it.

After that, please connect the camera according to the following steps.

Connect the camera to the LAN network (Router or Switch) via Ethernet cable.

Connect the power adapter cord to the DC In jack.

Plug the power adapter into the power outlet.

Table of Contents