Table of Contents
Advertisement
NO.
Function
Audio On / Audio Off
Static IP / DHCP /
PPPOE / DDNS
SNTP
2
Network
FTP
MAIL
Snapshot Path
Frame Rate
System Type
Stream Format
Maximum Exposure
Limits
3
Camera
Detection
Motion
Level
Color Setting
5
General
Language
Mac Address
Description
Choose the audio function: On or Off.
(This audio function is only for AVI202 and AVI212
model)
In the "Network" page, you can set the network
configuration of the network camera. For details,
please refer to "Network" section of the Video
Viewer on Page 29.
Set the SNTP (Simple Network Time Protocol) for
the time setting. For details, please refer to "SNTP"
section of the Video Viewer on Page 27.
Assigned a specific FTP site for the motion/alarm
notification function. For details, please refer to
"FTP" section of the Video Viewer on Page 34.
Assigned
motion/alarm notification function. For details,
please refer to "MAIL" section of the Video Viewer
on Page 34.
Set the location where the snapshot pictures are
saved.
According to the bandwidth, set the required frame
rate (FULL / HALF / ONE THIRD / QUARTER / ONE
FIFTH / ONE TENTH / ONE FIFTEENTH). For
details, please refer to "Video" section of the Video
Viewer on Page 35.
Set the system type of the connected network
camera (NTSC / PAL).
Select
the
transmission (MPEG-4 / Motion JPEG).
To compensate for the lighting conditions, the
maximum exposure time can be adjusted. For
details, please refer to "Video" section of the Video
Viewer on Page 35.
Motion detection is used to generate a motion
trigger whenever a movement occurs in the video
image. Set the motion detection area. For details,
please refer to "Motion Trigger" section of the Video
Viewer on Page 22.
Set different motion sensitivity level according to
Sensitivity
different application. For details, please refer to
"Motion Trigger" section of the Video Viewer on
Page 27.
Adjust the brightness / contrast / hue / saturation for
the network camera. For details, please refer to
"Color Setting" section of the Video Viewer on Page
19.
Support English / Chinese language for the web
interface.
Display the MAC address of the network camera.
For details, please refer to "General" section of the
Video Viewer on Page 24.
44
TL-SC3000
3GPP Surveillance Camera
a
specific
email
account
stream
format
of
for
the
the
network
Hide quick links:
Advertisement
Table of Contents
