Table of Contents
Advertisement
3.3.4 PPPoA (RFC 2364)
1. Choose PPPoA (RFC 2364) in Figure 3-5, press Next.
2. Enter the VPI/VCI value, choose the Capsulation type, press Next.
3. As Figure 3-14, enter the Username, password and Encrypt protocol provided by
your ISP. Press Submit.
4. If you succeed, the SUBMIT SUCCESS screen will appear (See Figure 3-8). Press
OK to finish the configuration.
Note:You don't need the Dial software when you use PPPoA protocol. The router can
automatically dial for connection. You can back to Show Status screen to check
whether the connection is successful.
TD-8800
Ethernet ADSL Router User Guide
Figure 3-13
Figure 3-14
- 12 -
Advertisement
Table of Contents
