Eoa (Rfc 1483 Bridged) - TP-Link TD-8800 User Manual

PPPoE (RFC 2516) (adapt to dial users)
Note:The protocol will vary depending on different places. Select the corresponding one
according to your ISP's parameters.

3.3.1 EoA (RFC 1483 Bridged)

1. Choose EoA (RFC 1483 Bridged), press Next to ATM VC Config (See Figure 3-5)
2. Enter VPI/VCI value which is provided by your ADSL service provider, choose the
AAL5 Capsulation type, press Next (Figure 3-6).
The fixed IP users can enter the parameters provided by ISP such as IP address and
gateway to the WAN setting, witch you also can enter the parameter to the NIC in your
PC.
3. Press Submit after you confirm the configuration. Like Figure 3-7
4. Press OK on the screen as Figure 3-8
TD-8800 Ethernet ADSL Router User Guide
Figure 3-6
Figure 3-7
- 9 -