Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Pilz 541 053
Summarization of Contents
Product Overview and Safety
Introduction and Documentation Use
Provides overview, usage guidelines, and symbol definitions for the manual.
Intended Use and Compliance
Details safety functions, compliance, and EMC installation requirements.
Safety Regulations and Personnel
Covers safety assessment, qualified personnel, warranty, and disposal procedures.
Critical Safety Warnings and Unit Features
Highlights crucial safety warnings and lists key product features.
Function Description
Basic Function
Explains how the safety outputs signal based on actuator position.
Block Diagram
Provides a schematic representation of the product's internal components and connections.
Operating Distances
Lateral and Vertical Offset
Illustrates permitted lateral and vertical displacement for actuator alignment.
Wiring
Pin Assignment, Connector and Cable
Details the pin configuration, connector type, and wire colours for connection.
Connection to Evaluation Devices
Connection Diagram, Single Connection
Shows a single connection diagram for integrating the safety switch with an evaluation device.
Installation and Mounting
General Installation Guidelines
Provides general guidelines and precautions for installing the safety switch and actuator.
Safety Switch Mounting
Details the procedure for securely mounting the safety switch using M4 screws.
Actuator CS3.1 Mounting
Step-by-step guide for installing PSEN cs3.1 actuator using M4 screws and ensuring correct alignment.
Actuator CS3.1 Low Profile Mounting
Instructions for installing low profile actuators via glue or screw, including surface prep.
Setup and Adjustment
Aligning Safety Switch and Actuator
Steps to align the safety switch and actuator correctly after mounting.
Product Adjustment
Notes on adjustment related to operating distances and offsets.
Operation
Operational Status and Fault Indication
Explains the meaning of LED indicators and fault signals for operational status.
Dimensions and Specifications
Safety Switch Dimensions
Provides detailed dimensional drawings and measurements for the PSEN cs3.1n safety switch.
Actuator Dimensions
Shows dimensional drawings for various PSEN actuator models.
Technical Details
Safety Switch Specifications
Details general, electrical, semiconductor, and timing data for the safety switch.
Safety Switch Environmental and Operating Data
Covers environmental conditions, EMC, vibration, shock, protection type, and operating distances.
Actuator Operating Distances and Mechanical Data
Lists operating distances for various actuators and mechanical specifications of the safety switch.
Actuator Specifications
Provides general, environmental, EMC, and mechanical data for the actuators.
Classification according to ZVEI, CB241
Single-Pole Output Interfaces
Describes interface classification and source parameters for single-pole outputs.
Supplementary Information
Radio Approval Details
Provides FCC and Industry Canada compliance information for radio frequency devices.
Order Reference and Accessories
Lists product order numbers for switches, actuators, systems, and accessories.
Need help?
Do you have a question about the 541 053 and is the answer not in the manual?
Questions and answers