Related Manuals for Kränzle e-therm 500 M 24
Summarization of Contents
Explanatory Symbols Guide
Symbols in Operating Manual
Explains symbols found within the main operating manual text for clarity.
Symbols on High-Pressure Cleaner
Details symbols directly attached to the high-pressure cleaner unit itself.
Symbols on Product Packaging
Describes symbols found on the external packaging of the product.
Essential Safety Notes
Prohibited Actions
Lists specific actions that are forbidden during operation to ensure user safety.
High-Pressure Cleaner Description
Design: Without Hose Drum
Details the design and components of models without an integrated hose drum.
Design: With Hose Drum
Details the design and components of models featuring an integrated hose drum.
Construction: Operating Panel
Describes the layout and functionality of the machine's control panel.
Construction: Interior Fittings
Explains the internal components and their arrangement within the cleaner.
General Operational Rules
Intended Use and Regulations
Specifies approved applications and required environmental regulations.
Inspection Requirements
Outlines required inspection procedures and intervals for safe operation.
Accident Prevention Measures
Provides guidance on how to prevent accidents and injuries during use.
Functional Details and Features
Thermostat Operation Modes
Explains the two operating modes of the thermostat for temperature control.
Operating Hour Meter Function
Describes the function and display of the machine's operating hour meter.
Operational Considerations
Water Supply Issues
Addresses problems related to insufficient water supply and its consequences.
Electrical Supply Issues
Discusses problems arising from inadequate electrical power supply.
Water Supply Connection
Details regulations and requirements for connecting to water supply lines.
Electrical Connection
Specifies correct procedures and standards for electrical hookup.
Putting Into Operation Guide
Initial Setup and Preparation
Covers essential steps for preparing the machine before first use.
Connecting Hoses and Accessories
Guides on properly connecting the high-pressure hose and trigger gun.
Water Inlet Filter Maintenance
Instructions for inspecting and cleaning the water inlet filter for optimal function.
Operating Modes
Cold Water Operation
Step-by-step guide for operating the cleaner using cold water.
Hot Water Operation
Step-by-step guide for operating the cleaner using hot water.
Direct Suction Operation
Setup for Water Extraction
Instructions for bypassing the water tank to suck water from external sources.
Taking Out of Operation
Shutdown and Frost Protection
Details steps for safely shutting down the machine and protecting it from frost.
Maintenance and Inspections
Kränzle Performed Inspections
Lists the specific checks and procedures conducted by Kränzle during inspections.
Liquid Sprayer Guidelines
Refers to external guidelines for periodic inspection of spray equipment.
Owner's Maintenance Duties
Outlines the owner's responsibilities regarding machine upkeep and safety.
Troubleshooting Common Issues
No Water Output
Diagnoses and resolves the problem of no water output despite the running machine.
Irregular Water Jet
Addresses issues causing an inconsistent or sputtering water jet.
Troubleshooting Advanced Issues
Intermittent Machine Cycling
Solves the problem of the cleaner cycling on and off unexpectedly.
Defective Non-Return Valve
Guides on identifying and rectifying a faulty non-return valve.
Summary of Malfunctions
Water Supply Problems
Lists various issues related to the water intake and supply system.
High-Pressure Pump Issues
Covers common malfunctions concerning the high-pressure pump's performance.
Start/Stop and Leakage Problems
Addresses problems with starting, stopping, and leaks in the system.
Kränzle Accessories
Adapters and Extensions
Details available adapters and extensions for various accessories.
Cleaning Accessories
Lists accessories like floor washers and lances for cleaning tasks.
Specialised Lances and Hoses
Describes specific lances like Turbokiller and suction hoses.
Regulatory and Warranty Information
EU Declaration of Conformity
States the product's compliance with relevant EU directives and standards.
Warranty Terms and Conditions
Explains the warranty coverage, limitations, and conditions for the product.
Inspection and Final Reports
Industrial Inspection Requirements
Details mandatory safety inspections for industrial applications.
Inspection Scope and Results
Outlines the checklist for inspections and recording results.
Final Report Checklist
Lists final checks and fields to be completed in the final report.
Need help?
Do you have a question about the e-therm 500 M 24 and is the answer not in the manual?
Questions and answers